CALL TODAY 800-782-1836

PEEK Thermoplastic

Sheet Rod Tube Film

PolyEtherEther Ketone Plastic

 PolyEtherEtherKetone, also known as PEEK, is a high performance engineering thermoplastic that offers the same chemical and water resistance as PPS (PolyPhenylene Sulfide), but can withstand greater temperatures. PEEK can be continuously used in water or steam without permanent loss in physical properties to a temperature of 480°F (250°C).

Since 1998, unfilled PEEK has been approved by the FDA and can be used as a high strength alternative to fluoropolymers for hostile environments. Carrying a V-0 flammability rating, Peek exhibits low smoke/toxic gas emission when exposed to open flame. We offer CNC machining for PEEK materials; available in sheet, rod, film, and tube for all applications.

PEEK Machining

Nationwide Plastics is proud of our reputation as “the authority on plastics manufacturing and distribution,” and make sure that we understand both your application and your requirements so that we will provide you with high quality, tight tolerance products that meet your specifications. Offering a variety of PEEK machining and fabrication services, we will work with you to select the most effective and efficient manufacturing process for your PEEK machined part and manufacture the part to your exact specifications.

Our state-of-the-art facility is equipped with over 20 pieces of equipment to provide custom plastic turning, milling, routing and sawing services. We specialize in manufacturing large parts and our equipment is designed to process parts up to 148’ or longer, with tolerances to +/- .001, depending on the material. Call Nationwide Plastics today for all of your PEEK machining needs.

Characteristics

  • 30% Glass Filled: Provides additional strength, stiffness, or stability, for applications at temperatures above 300°F (150°C). 
  • 30% Carbon Filled: Enhances the compressive strength and stiffness providing optimum wear resistance and load carrying capability. 
  • Bearing Grade: Carbon fiber reinforced with graphite and PTFE lubricants provides lowest coefficient of friction and the best machinability
Thickness
0.032" x 4"
0.010" x 4"
Diameter
0.250" to 6.00"
0.030" to 6.00"
OD
1.25" to 6.5"
1.00" to 15"
ID
.5" to 5.5"
.5" to 14"
Quote
Custom quote, please provide required finish size.
Quote
Custom quote, please provide required finish size.

Product Listing

Filter Options

Product Options

Plastic
  1. PEEK (39)
  2. PETG (4)
Type
  1. Rod (39)
  2. Sheet (4)
Thickness
  1. 1 - 1.00 (2)
  2. 1-1/2 - 1.500 (2)
  3. 1-1/4 - 1.250 (2)
  4. 1-1/8 - 1.125 (2)
  5. 1-3/4 - 1.75 (4)
  6. 1-3/8 - 1.375 (2)
  7. 1-5/8 - 1.625 (2)
  8. 1/2 - .500 (1)
  9. 1/4 - .250 (1)
  10. 1/8 - .125 (1)
  11. 2 -2.000 (2)
  12. 2-1/2 - 2.500 (2)
  13. 2-1/4 - 2.250 (2)
  14. 2-3/4 - 2.750 (2)
  15. 2-3/8 - 2.375 (1)
  16. 3 - 3.000 (2)
  17. 3-1/2 - 3.500 (2)
  18. 3-1/4 - 3.250 (2)
  19. 3-3/4 - 3.750 (1)
  20. 3/16 - .187 (2)
  21. 3/4 - .750 (2)
  22. 4 - 4.000 (1)
  23. 5/8 - .625 (1)
  24. 7/8 - .875 (2)

Items 1 to 20 of 43 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
SKU # Item Name  
40004500 1/2 DIA PEEK ROD VIRGIN

40004800 5/8 DIA PEEK ROD VIRGIN

40005000 3/4 DIA PEEK ROD VIRGIN

40005200 7/8 DIA PEEK ROD VIRGIN

40005400 1 DIA PEEK ROD VIRGIN

40005600 1 1/8 DIA PEEK ROD VIRGIN

40005700 1 1/4 DIA PEEK ROD VIRGIN

40006000 1 3/8 DIA PEEK ROD VIRGIN

40006100 1 1/2 DIA PEEK ROD VIRGIN

40006200 1 5/8 DIA PEEK ROD VIRGIN

40006400 1 3/4 DIA PEEK ROD VIRGIN

40006600 2" DIA PEEK ROD VIRGIN

40006800 2 1/4 DIA PEEK ROD VIRGIN

40007000 2 3/8 DIA PEEK ROD VIRGIN

40007100 2 1/2 DIA PEEK ROD VIRGIN

40007300 2-3/4 DIA PEEK ROD VIRGIN

40007500 3 DIA PEEK ROD VIRGIN

40007600 3 1/4 DIA PEEK ROD VIRGIN

40007800 3 1/2 DIA PEEK ROD VIRGIN

40736400 2 3/4"OD X 1 3/4" ID X 12"

Items 1 to 20 of 43 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction